LQB Asphalt Gear Pump

1. Overview
LQB asphalt heat preservation pump is suitable for conveying non-corrosive, solid particles, and solidification medium at room temperature. It is especially suitable for outdoor installation in high-cold areas and occasions where the medium needs heat preservation during the process. The medium temperature can reach 250°C and the viscosity It is 5-1500cst. When the temperature of the medium conveyed by the asphalt insulation pump is high, the pump needs to be cooled. The purpose of cooling is not single and essential. Not all pumps need to be cooled. When the temperature of the medium you transport is room temperature or a lobe rotor pump, no cooling is required.

2. Application range
The material of LQB thermal insulation asphalt pump is cast steel, which is more than 10 times the life of cast iron. The II type material Q235 is suitable for transporting non-corrosive, non-solid particles of heavy oil/asphalt and other types that have solidification at room temperature. As well as the occasions where heat preservation is required during outdoor installation and process in alpine areas. It is used to transport heavy oil, asphalt, glue, resin, detergent, etc.

3. Structural features
The pump body is provided with a hollow interlayer and an inlet and outlet flange, which can be used for heat transfer oil, steam, hot water and other media to heat, heat and cool the liquid and the pump.

4. Technical parameters